[Jewelry making - Article 00462] - Re: [Orchid] Hide glue & granulation

[Regis]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Thanks to all who helped me on this.   If your formula works don't
    change but, here is how I ended up.    I never got the Klyr-Fire to
    work and many others do so I must accept that the new bottle I got 2
    weeks ago is bad. It only dried in the kiln at pretty high temp.  
    Several people sent formulas for hide glue flux and water.   It seems
    that they all had equal parts of Batterns flux and glue and then
    watered down with 3-6 times the amount of water.   This worked very
    well for me as it did for many of you. I'm now using the one from
    Karen Christians: 

		 20 drops distilled water
		 5 drops hide glue
		 5 drops Batterns flux

    The smell doesn't seem too bad.  I guess if it was not diluted so
    much with water, it would be worse. Thanks again, 

Regis

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________