[Jewelry making - Article 00495] - [Orchid] Small ring stretcher

[Loren S. Damewood]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Does anyone know of a source of ring stretchers that will work on
    _very_ small rings? I've got a couple of models, a table mount one and
    a hand held screw type, but neither one of them goes to a small enough
    size to help me with this latest ring, a size 3. 

    I'm thinking that it might be possible to dismantle the cheaper hand
    held model and grind away some material in order to reduce the minimum
    size, but that's a rather drastic solution. 

    Ideally, I'd like one of the table mounted models in a very small
    size, the smaller the better, as even a mid-sized ring could start out
    so small that the regular one won't go in. 

    Loren http://www.golden-knots.com/ lorenzo AT intnet.net
    lorenzo AT golden-knots.com  

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________