The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Holding metal while finishing  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: coralnut
Date: Fri May 30 20:44:14 2008
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Tim....agree completely that wearing gloves when polishing IS
    dangerous. I have not actually seen the damage it can do to ones'
    hand(s) but have heard a number of gruesome tales of what it can do.
    I advise alllllll my students not to wear gloves. Instead we use
    either the green self stick tape (can't remember what its called) or
    the leather finger cotts. 

    Just think folks....that motor is turning at 3450rpm. (note: I never
    use the 1725rpm as it just does not do the job.....unless that is,
    there is nothing else available). The rpm is measured at the center
    of the spindle/shaft. But the rim speed of the buffing wheel is
    actually much much higher; and the larger the polishing wheel, the
    higher the rim speed. Rim speed is calculated using a reasonably
    complex formula (for us mathematically challanged) but suffice it to
    say that it you might be shocked at the actual outside rim speed of a
    polishing wheel. This is a REALLY DANGEROUS machine folks if not used
    properly. So, sans the gloves and save a finger!!! 

    Cheers from Don at The Charles Belle Studio in SOFL where simple
    elegance IS fine jewelry!
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project