[Jewelry making - Article 00174] - RE: Hollow Core Bracelet/ Tool materials

[Dodge, Steven M. x4185]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Any tips for working Delrin?  It seems like I need a bandsaw to cut it
    (which I don't have).  It seems like it would file pretty easily, but how
    do you cut or form it?

    Delrin is similar to teflon and nylon. It has good elastic properties .
    When cutting it on a mill or lathe, a very sharp tool is needed. If  you  
    are just cutting a rod to length then a  hack saw would work well, but a
    bandsaw would be desirable if you   are cutting flat patterns. Unless there
    are some tricks that I'm not aware of , Delrin does not   form  well.
    (because of the elastic properties) It comes in a variety of diameters and
    thickness . It is typically black   in color ,but is also available in
    white.

Steve D.


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________