Gold-Inlay Engraving with AirGraver- Part 1.1
- Description
Hand engraving a high art knife with the Lindsay AirGraver: Part 1, initial outline cutting.
The AirGraver is an engraving tool that runs from
direct, steady air-flow and utilizes either an air
compressor or CO2 cartridges for portability. The
device can be set up to operate from the natural
pressure of the user's hand (PalmControl) or may
be operated using a foot pedal. www.AirGraver.com
www.EngravingArtist.comwww.EngravingClasses.com
www.EngravingForum.com
View a photo of the completed engraving here: www.EngravingArtist.com/goldknife.jpg - Author
You assume all responsibility and risk for the use of the safety resources available on or through this web page. The International Gem Society LLC does not assume any liability for the materials, information and opinions provided on, or available through, this web page. No advice or information provided by this website shall create any warranty. Reliance on such advice, information or the content of this web page is solely at your own risk, including without limitation any safety guidelines, resources or precautions, or any other information related to safety that may be available on or through this web page. The International Gem Society LLC disclaims any liability for injury, death or damages resulting from the use thereof.