Hollowing Out A Wax Model For Lost Wax Casting
- Description
In this demonstration, a wax model is shown, and will be hollowed out from behind. A strong light is mounted on the bench top, and the hollowing work is done in front of this light source.
A rim demarcation is made with a set of dividers, and the hollowing is done within these lines with a rotary tool and small ball bur. The wax model wall thickness is burred out to 1 MM. - Author
You assume all responsibility and risk for the use of the safety resources available on or through this web page. The International Gem Society LLC does not assume any liability for the materials, information and opinions provided on, or available through, this web page. No advice or information provided by this website shall create any warranty. Reliance on such advice, information or the content of this web page is solely at your own risk, including without limitation any safety guidelines, resources or precautions, or any other information related to safety that may be available on or through this web page. The International Gem Society LLC disclaims any liability for injury, death or damages resulting from the use thereof.